Track a load session over session: per-shot velocities, velocity and SD trends, temperature sensitivity, group size and point of aim drift, plus barrel round count and brass firings. Once a load is dialed in with the Load Development Lab, bring it here and follow it for the life of the barrel. Tracking is part of LRS Pro.
LRS Pro Feature
The Long-Term Load Tracker, with per-shot velocity logging, velocity and SD trends, point of aim drift and barrel round counts, is part of LRS Pro. Start your free 7-day trial to unlock it, or sign in if you already have an account.
No loads on your account yet. Save a group to a new rifle and load in the Group Analyzer, or build one in the Load Development Lab, then come back to track it.
Measuring groups? Use the Group Analyzer to measure your target, then save the group to this load and it shows up here automatically. If you measured it another way, you can type the group size in when you log a session below.
Powder temperature is what actually drives velocity. If you can measure it, enter it and it is used for the temperature fit instead of air temperature. If you leave it blank, air temperature is used as the powder temperature.
Already measured the group yourself? Enter it here and it is saved with this session. Distance is required when you enter a group size. Groups saved from the Group Analyzer are picked up automatically, so skip these fields for those.
Barrel round count goes up by the session shot count. Use Set Count above to correct it.
